Stabilizacja zboczy podatnych na osuwiska za pomocą kotew rurowych

Abstrakt

This paper presents an anchor of a new design, whose properties have been selected to retain the advantages of a tubular anchor over the other anchor types and at the same time, ensure its adaptation to specific conditions associated with slope stabilization. The proposed anchor consists of a steel tube filled with expanding cement mortar. The outer diameter of the tube is 2-3 mm less than the diameter of the borehole, a groove is cut on the outer surface of the tube. A metal rod is placed in the center of the tube at the outer end of which a support plate is installed, and a tie wrench is fixed. The length of the metal rod is equal to the depth of the bore hole, while the length of the steel tube is at least half the length of the borehole. In the process of solidification and expansion of the solution, pressure is created on the walls of the bore hole. Under the influence of pressure, the pipe is opened around the groove and close contact is achieved between the pipe and the borehole surfaces. As soon as the solution hardens, the steel tube is firmly embedded in the concrete, after which the anchor reaches operational capacity. Preliminary tests of the proposed anchor showed that it has a high clamping force (for hard rock conditions - 46-75 kN/m and for soft rock conditions 32-36 kN/m). He has other advantages, namely it does not require special equipment for installation, the inside of a tube is filled with hard concrete-like mass, which hampers the process of corrosion and increases shear strength.